Skip to content
Rezo

Power supplies

Which power supply suits your equipment? Contact us for advice or a quote

Filter by

Brand

Price incl. VAT

Price incl. VAT

Brand compatibility

Brand compatibility

Output power

Output power

Output current

Output current

Purpose

Purpose

  • Official USB-C power supply 15 W, Raspberry Pi 4 and 400, 1.5 m cable, European plug, black

    In stock

    €11.90 incl. VAT

  • PoE+ expansion board for Raspberry Pi 4 and 3B+, IEEE 802.3at, fan

    In stock

    €62.90 incl. VAT

  • 27 W USB-C Power Delivery power supply for Raspberry Pi 5, EU plug, 1.2 m cable, black

    Available

    €25.90 incl. VAT

Power adapters, redundant PSUs and charging bases for work

A power supply delivers the current a device cannot draw straight from the wall socket, whether it is a switch, an access point, a wireless headset or a handheld terminal. This section covers external AC adapters, universal units with screw terminals, redundant power supplies and plug-in modules for switches. Alongside them sit DIN rail power supplies for electrical cabinets, multi-port USB-C chargers and charging stands for headsets, DECT handsets and mobile computers.

In a network rack, a second power supply takes over if the first one fails, so IP phones and PoE-powered access points do not all go dark at once. In a contact centre or open-plan office, a desk stand holds the wireless headset and tops it up between calls, while in a warehouse a multi-bay base charges several terminals or batteries together. DIN rail units, for their part, power a router or an industrial switch mounted in a technical enclosure.

Output voltage comes first, as it must match the device exactly, with 12 V, 24 V, 48 V or 54 V across the listings, the last being common on PoE equipment. Wattage follows, with headroom above real consumption, the 210 W Ubiquiti adapter for instance being sized for a fully loaded PoE switch. Form factor matters just as much, from an external brick to a module that slots into a 1U rackmount switch, a hot-swappable unit or a slim DIN rail housing. On chargers, USB-C Power Delivery support decides whether a laptop or tablet charges at full speed.

The switch series named on the product page are the only reliable guide, as a power module or redundant unit fits those alone. On a PoE switch, the supply's wattage also sets the PoE budget shared by connected devices, and an undersized unit will shut ports down. For headsets, the same stand often comes in USB-A and USB-C versions, to be matched to the computer's free port. Finally, a universal unit with screw terminals requires correct polarity when wiring.

Replacing a device's lost brick or charging a laptop and a phone on the same desk rarely calls for more than a replacement adapter or a multi-port USB-C charger. In company offices, one stand model per headset range makes swapping equipment easier, and core network switches get a second power supply. A school or council department running DECT handsets or mobile computers is better served by multi-bay bases that charge a whole batch of devices in one place.

On the networking side, D-Link, TP-Link with its Omada range, Reyee and Ubiquiti offer modules and power bricks built for their own switches, while Meanwell and D-Link cover DIN rail mounting. Jabra, with stands for the Evolve and Engage ranges, and HP Poly, with those for Voyager, Savi and Sync, look after office headsets. Mitel, Unify and Spectralink supply dedicated chargers for their DECT handsets, Honeywell for its data capture terminals, and StarTech.com, Conceptronic and Unitek provide universal adapters and chargers.

Frequently asked questions

What is the difference between a redundant power supply and a switch power module?

A power module slides into a dedicated bay on the switch, often at the rear of a rackmount model, and can sometimes be swapped while the switch is running. A redundant power supply is a separate unit connected to the switch, taking over if the internal supply fails. Either way, only the switch series named on the product page are compatible.

Which voltage and wattage should I choose to power a PoE switch?

The voltage must match the one printed on the equipment, often 54 V for PoE hardware, as on the 210 W Ubiquiti adapter. The supply's wattage then sets the PoE budget shared across ports, and therefore how many phones, cameras or access points can be powered at once. It is wise to keep some headroom above the stated consumption.

Do I need a USB-A or USB-C charging stand for an office headset?

Both Jabra and HP Poly offer several stands in either connector for the same headset range. The connector should match the free port on the computer or docking station. Each stand also takes one specific range only, Evolve, Engage, Voyager or Savi depending on the model, so check the headsets listed on the product page.

When does a DIN rail power supply make sense?

DIN rails are found in electrical cabinets and technical enclosures, in workshops, buildings and industrial sites. A unit in this format clips on next to the circuit breakers and delivers a DC voltage, 12 V, 24 V or 54 V depending on the model, to a router or an industrial switch. The slim Meanwell and D-Link models save space on the rail.

Can a universal AC adapter replace a device's original power brick?

Yes, provided the output voltage is identical and the wattage is equal to or higher than the original brick. The 24 V StarTech.com adapter is wired through a 2 or 3-wire screw terminal, which means getting the polarity right and suits an installer best. It comes with several mains leads.

How can I charge several mobile computers or DECT handsets in one place?

Multi-bay bases charge a batch of devices or batteries on a single cradle, such as the Honeywell docks for warehouse data capture terminals. For wireless telephony, Mitel, Unify and Spectralink offer chargers built for their own DECT handsets, single or multiple depending on the model. Compatibility should be checked against the exact handset or terminal model.

Can a multi-port USB-C charger power a laptop?

It can if the charger supports USB-C Power Delivery and the port in use delivers enough power for the laptop. A multi-port charger's total output is shared between connected devices, so a single port does not always reach its maximum when every port is busy. The per-port split is shown on the product page, depending on the model.