Skip to content
Rezo

Storage controllers

Which controller suits your drives? Contact us for advice or a quote

Filter by

Brand

Price incl. VAT

Price incl. VAT

  • USB 2.0 to M.2 SATA converter for Raspberry Pi and development boards, 2230 to 2280, red

    In stock

    €36.90 incl. VAT

  • M.2 M Key expansion board for Raspberry Pi 5, PCIe 2.0 x1, 2230 and 2242 NVMe SSD

    Unavailable

    €17.90 incl. VAT

  • Cable and mechanical part kit for BOSS-S2 card, PowerEdge T550 server

    Unavailable

Fibre Channel HBA cards and server storage controllers

A storage controller links a server to its drives or to a shared storage array, and it governs both the throughput and the redundancy of data access. Rezo offers Fibre Channel HBA cards from the Lenovo ThinkSystem range, built around a QLogic chip, which connect a server to a SAN storage network.

This kind of card earns its place when several virtualisation hosts share the same disk array, or when a database server needs fast and consistent access. It also helps when backups go to a dedicated array without loading the company's Ethernet network.

Throughput comes first, with Fibre Channel links at 32 Gbit/s. The 2 ports can be wired to 2 separate switches, so a failed cable or switch does not cut off access to the data. The PCIe 4.0 x8 interface and low-profile format then determine which slot and chassis can take the card. An HBA passes the array's volumes through to the server without handling RAID itself, which sets it apart from a RAID card.

Before buying, check that a free PCIe x8 or wider slot is available, that the bracket suits the chassis and that a driver exists for the operating system. The SFP+ ports come fitted with their modules, but optical patch cables still need to be planned for. A Fibre Channel card does not plug into an Ethernet switch, since the 2 protocols cannot talk to each other.

These cards mainly serve the server room of a business, a hosting provider or a local authority that already runs a SAN or is building one. Across a fleet of ThinkSystem servers, using the same card on every machine keeps drivers and spare parts simple. Outside the server room, for a household as for a small team, it has no use, as Ethernet network storage is enough.

Frequently asked questions

What is the difference between an HBA and a RAID card?

An HBA connects the server to drives or an array and presents the volumes as they are, without parity calculation. A RAID card combines several drives into a protected volume itself. With a SAN array, the array handles drive redundancy, which is why a Fibre Channel HBA is used on the server side.

Can a Fibre Channel card be plugged into an Ethernet switch?

No. Fibre Channel and Ethernet are separate protocols, even when the ports share the same SFP+ form factor. A Fibre Channel HBA connects to a Fibre Channel switch or directly to a compatible storage array, never to the company's local network.

Why choose an HBA card with 2 ports?

The 2 ports can be wired to 2 separate switches or paths to the array. If a cable, module or switch fails, the server keeps reaching its data through the other path. Depending on the system configuration, the second port can also spread the load across both links.

Will a PCIe 4.0 x8 card work in my server?

You need a free PCIe x8 or wider slot and a bracket that suits the chassis, as the card uses a low-profile format. Also check that a driver exists for the installed operating system and that the card is listed among the options supported by the server model.

Which accessories are needed with a Fibre Channel HBA?

The SFP+ modules come already fitted to the ports, so only the optical patch cables to the switch or array remain to be planned. On the infrastructure side, a compatible Fibre Channel switch and storage array complete the setup, depending on the SAN design.

Is a Fibre Channel HBA useful for a virtualisation cluster?

Yes, this is a common use for this type of card. Each host in the cluster gets an HBA and reaches the same volumes on the array, which makes moving virtual machines between hosts easier. At 32 Gbit/s per port, storage traffic also stays separate from user network traffic.