Skip to content
Rezo

SFP modules

Which module suits your switch? Contact us for advice or a quote

Filter by

Brand

Price incl. VAT

Price incl. VAT

Maximum data transfer rate

Maximum data transfer rate

Interface type

Interface type

SFP transceiver type

SFP transceiver type

Maximum transfer distance

Maximum transfer distance

SFP transceivers and optical modules for switches and servers

An SFP module, also known as a transceiver, plugs into the port of a switch, router or network card to connect it to optical fibre or copper cabling. The range covers SFP modules at 1 Gbit/s, SFP+ at 10 Gbit/s and SFP28 at 25 Gbit/s. For core network links, there are also QSFP+ at 40 Gbit/s and QSFP28 at 100 Gbit/s. Direct attach copper (DAC) cables, active optical cables, fibre patch leads and media converters sit alongside these modules.

Linking 2 buildings on the same site usually calls for a single-mode 10GBASE-LR module, rated for 10 km. Inside a rack, a server connects to its switch through a multimode 10GBASE-SR or SFP28 module at 850 nm, or more simply through a DAC cable when both devices sit next to each other. A 10GBASE-T module with an RJ45 socket lets copper equipment join an SFP+ port without recabling.

Fibre type steers the first choice. Multimode handles short runs, 100 m for SFP28, 300 m for 10GBASE-SR or 550 m for 1000BASE-SX, whereas single-mode stretches from 10 km up to 70 km with a 1000BASE-ZX module. The wavelength, 850 nm, 1310 nm or 1550 nm, must match at both ends. The exception is BiDi modules, which transmit and receive over a single LC simplex fibre and are installed in pairs. CWDM modules, from 1270 nm to 1590 nm, carry several 10 Gbit/s links over one single-mode fibre through a multiplexer.

Before buying, check that the port supports the intended speed, since an SFP port cannot run an SFP+ module, while an SFP+ port often accepts a 1 Gbit/s module depending on the manufacturer. Some switches also reject third-party optics, which is why StarTech.com modules are coded as compatible with Cisco, HPE or Arista. The connector matters just as much, LC duplex in most cases but MPO-12 on a QSFP28 PSM4, and patch leads must match it. On copper, a 10GBASE-T module is limited to 30 m and runs hotter than an optical one.

A single workstation or small link needs no more than 2 identical modules and a suitable patch lead. In a business, one part per use keeps stock simple, all the more so as modules come in packs of 10. DOM also reports temperature and optical power to the monitoring tool. To link the buildings of a campus or town hall, single-mode leaves headroom on distance, and a refurbished Cisco module extends the life of an installed network.

Original modules from Cisco, HPE or Dell are the natural pick for equipment from those makers. Ubiquiti offers CWDM, BiDi, SFP28 and QSFP28 modules for its UniFi line, while Blueoptics, Digitus, Trendnet, Level One, TP-Link, Lenovo, Nvidia and Arista round out the range with modules and DAC cables. MCL-Samar and C2G mainly supply the fibre patch leads that go with the modules.

To help you choose, read our guide Small business network and Wi-Fi.

Frequently asked questions

What is the difference between SFP, SFP+ and SFP28 modules?

All three share the same physical format but not the same speed. An SFP runs at 1 Gbit/s, an SFP+ at 10 Gbit/s and an SFP28 at 25 Gbit/s.

A faster port often accepts a slower module depending on the manufacturer, but never the other way round. The switch datasheet lists the supported speeds.

Should I choose a multimode or single-mode module?

It depends on distance and on the fibre already installed. Multimode, often at 850 nm, serves a rack or a building over 100 m to 550 m depending on speed. Single-mode links buildings or sites over 10 km and up to 70 km depending on the module. The 2 types cannot be mixed on the same link.

Will a compatible module work in a Cisco or HPE switch?

StarTech.com modules are coded to be recognised as compatible with Cisco, HPE or Arista, each one stating the original part it replaces. Pick the one matching the switch brand.

Some equipment remains strict about accepted optics, so the manufacturer's documentation is the reference when in doubt.

What are BiDi and CWDM modules used for?

Both save fibre. A BiDi module sends and receives over a single LC simplex strand and is used in pairs, with a different wavelength at each end.

CWDM modules, from 1270 nm to 1590 nm, each carry a 10 Gbit/s link on its own wavelength, and a multiplexer combines them onto one single-mode fibre.

When is a DAC cable better than 2 optical modules?

A DAC cable connects 2 SFP+, SFP28 or QSFP28 ports directly through built-in connectors. It suits neighbouring devices in the same rack, with no separate patch lead or module.

Beyond a few metres or between distant racks, a pair of optical modules with a patch lead remains necessary, or an active optical cable instead.

Can an RJ45 10GBASE-T module replace a fibre module?

It connects a copper cable to an SFP+ port, which avoids recabling an existing installation. Its reach is limited to 30 m and it runs hotter than an optical module, which matters when several adjacent ports are in use.

At 1 Gbit/s, a 1000BASE-T RJ45 module reaches 100 m.

What does DOM do on an SFP module?

DOM, or digital optical monitoring, reports module temperature, voltage and transmitted and received optical power to the switch. The monitoring tool can then spot a dirty fibre or a degrading link before it fails. Support is shown on the product page depending on the model.