Skip to content
Rezo

Wireless bridges

Which wireless link between your sites? Contact us for advice or a quote

Filter by

Price incl. VAT

Price incl. VAT

Product line

Product line

Maximum data transfer rate

Maximum data transfer rate

5 GHz

5 GHz

Ethernet speed

Ethernet speed

Wireless bridges to link buildings without new cabling

A wireless bridge, also called an outdoor Wi-Fi bridge or point-to-point link, carries an Ethernet network from one site to another over a focused radio beam, where trenching or fibre would mean too much groundwork. From Ubiquiti, the listings cover the airMAX (NanoStation, NanoBeam, Rocket), LTU, Wave and airFiber ranges, alongside TP-Link outdoor CPE radios. Once the network reaches the building, an indoor Wi-Fi access point takes over to spread it, but it is not part of the bridge itself.

A business can link a warehouse or workshop to its main building, a town hall can connect outlying technical services and a school can extend its network to the sports hall. The same link can feed a camera or access control unit at the far end of a car park. In point-to-multipoint mode, a base station such as the LTU Rocket or Rocket Prism serves several client sites from a single high point.

The frequency band steers the choice. The 2.4 GHz used by the NanoStation M2 and NanoBeam 2AC copes better with foliage but shares a crowded band, whereas 5 GHz, the most common choice in the airMAX range, delivers more throughput. The Wave range runs at 60 GHz, reaching 5 Gbit/s over short distances and keeping a 5 GHz backup radio for when rain weakens the signal. Antenna gain, 11, 13 or 16 dBi depending on the model, narrows the beam and extends range as it rises, at the cost of more careful alignment.

A link is built as a pair, with both ends from the same range on the same band, and a clear line of sight between the antennas matters more than distance. Many airMAX radios run on 24 V passive PoE, which is not the same as the standard PoE delivered by a switch, so check whether an injector is supplied or plan for one. Rocket models connect to an external antenna through RP-SMA connectors, ordered separately, and a pole or wall bracket is also needed.

A home user linking an outbuilding or garden office only needs a pair of NanoStation or CPE units, then an access point indoors. To set up several identical links, a business can rely on the pack of 5 NanoStation 5AC Loco units. A local authority or small operator will lean towards a base station with GPS, useful for synchronising several transmitters, and IP67 weatherproofing for a lasting outdoor installation.

Ubiquiti radios handle long links between buildings, with the NanoStation 5AC adding 2 Gigabit ports to chain a device on site. TP-Link adds its outdoor CPE units for simpler links. When the network has to cross a yard or a road, a bridge is the answer. To cover the inside of a single building, an access point or mesh system does the job, with no bridge.

Frequently asked questions

What is the difference between a wireless bridge and a mesh system?

A wireless bridge links 2 distant sites with a focused outdoor beam, such as 2 buildings either side of a yard. A mesh system like Deco or Halo spreads Wi-Fi across several units inside a home or office.

The 2 are often combined, with the bridge bringing the network in and the mesh distributing it.

Should I pick a 2.4 GHz, 5 GHz or 60 GHz wireless bridge?

2.4 GHz passes through foliage more easily but the band is crowded. 5 GHz, the most common in the airMAX range, gives better throughput. The 60 GHz Wave range reaches 5 Gbit/s over short distances and relies on a 5 GHz backup radio in bad weather.

Do both ends of a link need to come from the same range?

Yes, check that both radios belong to the same range and work on the same band, airMAX with airMAX or LTU with LTU, for example. The simplest approach is to buy 2 identical models, or a pack such as the 5 NanoStation 5AC Loco units for several links.

Can a PoE switch power a NanoStation that uses 24 V passive PoE?

Not necessarily. 24 V passive PoE does not follow the standard used by PoE switches, and a standard port will not always power it. Check whether an injector comes with the model or plan for one, placed indoors on the network side.

What does antenna gain in dBi change in practice?

The higher the gain, the narrower the beam and the further it reaches. An 11 dBi antenna tolerates rough alignment over a short distance, while a 13 or 16 dBi antenna suits longer links and needs careful aiming between the 2 sites.

When is a point-to-multipoint base station better than a pair?

A pair links just 2 sites. A base station such as the LTU Rocket or Rocket Prism, mounted on a high point, serves several client sites at once. These models use an external antenna, bought separately, and their GPS helps synchronise neighbouring transmitters.