Skip to content
Rezo

AV over IP

Video over your network? Contact us for advice or a quote

Filter by

Brand

Price incl. VAT

Price incl. VAT

Type

Type

Power over Ethernet (PoE) support

Power over Ethernet (PoE) support

  • 2-channel Dante to XLR audio decoder, AES67, 24-bit 96 kHz, PoE or USB-C, black

    In stock

    €145.70 incl. VAT

  • 2-channel Dante to HDMI ARC audio decoder, AES67, 802.3af PoE, USB-C, black

    In stock

    €160.40 incl. VAT

  • 2-channel HDMI ARC to Dante encoder, AES67, 24-bit, PoE, USB-C, black

    In stock

    €160.40 incl. VAT

  • 2-channel Dante to analog audio decoder, AES67, 24-bit 96 kHz, PoE, black

    In stock

    €189.70 incl. VAT

  • 2-channel analogue audio to Dante encoder, AES67, 24-bit 96 kHz, PoE, black

    In stock

    €189.70 incl. VAT

  • USB-C Dante In/Out audio converter, 2 channels, AES67, PoE, black

    Available

    €174.10 incl. VAT

  • 2-channel XLR to Dante audio encoder, 802.3af PoE, USB-C power, black

    Available

    €174.10 incl. VAT

  • AV over IP controller for Lindy 38365 transceivers, PoE, 2 network ports, RS-232, IR, GPIO

    Available

    €558.00 incl. VAT

  • HDMI over IP streaming encoder, 4K 60 fps, H.265 and H.264, PoE, HDMI loop out

    Restock announced

    €468.70 incl. VAT

  • AV over IP transceiver, HDMI 2.0b, USB 2.0, 10G PoE, SFP+, RS-232, IR, black

    Restock announced

    €1,120.60 incl. VAT

  • AV over IP transceiver, HDMI 4K 60 Hz, XLR audio, PoE+, black

    In stock

    €297.30 incl. VAT

  • 4K 30 Hz HDMI over IP extender kit, transmitter and receiver, video wall, up to 100 m

    In stock

    €748.40 incl. VAT

  • Compact audio processor, Dante 4x4, AES67, PoE+, black

    In stock

    €852.00 incl. VAT

  • AVoIP decoder, 4K 60 fps, HDMI, PoE+, black

    In stock

    €1,373.50 incl. VAT

  • AV over IP encoder, 4K 60 Hz, 2 HDMI inputs, USB-C 60 W, PoE+, black

    In stock

    €1,373.50 incl. VAT

  • AV-over-IP room device controller, 6 RS-232, 2 RS-422/485, 4 relays, IR, GPIO, PoE

    In stock

    €1,477.80 incl. VAT

HDMI over IP extenders, Dante audio and network converters

Sending an HDMI picture, an audio stream or a control link over the Ethernet network instead of a dedicated cable is what AV over IP is about. The range includes HDMI over IP extender kits with transmitter and receiver, AV encoders and decoders with USB KVM, AES67-compatible Dante audio converters and network horn speakers. Alongside them sit copper to fibre media converters, HDMI, VGA, DVI and DisplayPort video adaptersand RS-232 serial converters.

In a lecture theatre or council chamber, an encoder next to the source and a decoder behind each screen show the same picture or build a video wall. The Lindy HDMI & USB over IP range drives up to 9 x 9 screens. A control room or conference hall connects XLR microphones, analogue outputs and HDMI ARC televisions to a Dante network, routing sound without running audio cabling. In a warehouse or car park, an IP66 horn speaker mounted on a wall or pole plays announcements and alerts straight from the network.

Resolution comes first. For digital signage or a presentation, 4K at 30 Hz is enough, while 4K at 60 Hz makes video and the pointer of a remotely controlled PC smoother. Transport matters just as much, since Gigabit models compress the stream with H.264 or H.265, whereas the SDVoE standard relies on a 10G network with an SFP+ port for near-zero latency. On the audio side, the Dante converters handle 2 channels at 24 bits, up to 96 kHz depending on the model.

On the switch side, PoE power has to keep up, 802.3af for the small Dante converters and PoE+ for the UniFi transceivers. A video stream sent to several screens travels as multicast, and a switch without IGMP snooping floods it across the whole network. Encoders and decoders pair within the same range, so mixing 2 brands or 2 standards will not work. Finally, a media converter has to match the installed fibre, single-mode or multimode, and the SC or SFP connector at the other end.

Linking a PC to a distant screen only takes an extender kit, with no configuration at all. Once several rooms in the same building share their sources, an AV controller manages encoders and decoders and switches sources over RS-232, IR or GPIO. Schools make the most of video walls and announcement systems, whereas a home user mostly needs a USB-C to VGA or HDMI to DVI adapter to keep an older monitor in service.

Lindy covers most of the video and audio over IP range, from Dante converters to SDVoE systems. Ubiquiti brings its AI Horn Speaker models and AV bridge into the UniFi ecosystem, and StarTech.com offers an HDMI over IP kit for video walls. Planet Technology, Level One, Barox, Digitus and Efb supply the media converters, with Planet adding rack chassis and industrial models, while Delock, Manhattan, Techly and Mediarange handle video and serial adapters.

Frequently asked questions

What is the difference between a Gigabit HDMI over IP extender and an SDVoE system?

A Gigabit extender compresses the picture, with H.264 or H.265 for instance, so it can run over a standard network. It suits signage, presentations and sending one source to several screens.

SDVoE carries video over a 10G network with an SFP+ port and cuts latency enough to control a remote PC with no noticeable lag.

Is my existing network switch enough to distribute video over IP?

Not always. The switch has to supply the PoE power the units need and support IGMP snooping, otherwise multicast traffic floods the entire network. SDVoE also requires 10G ports.

Many installations keep video on a dedicated switch or VLAN so that it does not disrupt everyday office traffic.

What does a Dante audio converter do?

It brings sound into or out of a Dante network from an XLR, analogue, USB-C or HDMI ARC source. The audio then travels over Ethernet cabling and can be routed to any other point on the network.

The models available handle 2 channels at 24 bits and are AES67 compatible, up to 96 kHz depending on the model.

Do encoders and decoders need a separate power supply?

Most units are powered over the network cable through PoE, so no mains socket is needed beside each screen. The small Dante converters run on 802.3af, and some also accept USB-C power.

More demanding transceivers require PoE+, which is worth checking on the switch before installation.

Can I control a computer remotely through an AV over IP decoder?

Yes, with a model that includes USB KVM, as in the Lindy HDMI & USB over IP range. A keyboard and mouse plugged in at the decoder end operate the computer connected to the encoder.

For smooth work, 4K at 60 Hz or an SDVoE link gives a more responsive pointer than 4K at 30 Hz.

How do I choose a copper to fibre media converter?

It depends on the installed fibre, single-mode for long runs or multimode within a building, and on the connector, a fixed SC port or an SFP cage for a module of your choice. Speed, Fast Ethernet, Gigabit or 10G, should match the switch.

For several links, a rack chassis groups the converters together, and industrial models cope with field cabinets.