HDMI over Cat6 extender with transmitter and receiver, 4K 60 Hz, 50 m, HDR, IR
Image 1 of 4
€238.60 incl. VAT
including an eco-contribution of €0.05
Available, free delivery, estimated Tuesday 8 or Wednesday 9 December
Warranty: 3 years
Which extender suits your distance? Contact us for advice or a quote
HDBaseT HDMI 4K wall plate transmitter over Cat.6 cable
This transmitter forms an HDBaseT link with a compatible receiver, such as the Lindy 38342. Its bidirectional infrared ports let you control the HDMI source from the display side, and the display from the source side. It suits digital signage in retail, displays at events and larger conference rooms or lecture halls.
Key features
- HDMI transmission over Cat.6 cable via HDBaseT, up to 70 m at 1920 x 1080 60 Hz
- Up to 40 m at 3840 x 2160 60 Hz, over a direct Cat.6 cable run
- HDMI 2.0 at 18 Gbit/s, HDR, HDCP 2.2, audio carried over HDMI
- Power over Cable (PoC) with on/off switch, a single power supply at one side of the installation
- IR input and output, RS-232 port on rear terminal block
- EU standard 1-gang wall plate, 8 x 8 cm, metal housing, white
- Supplied with multi-country power supply, 1.5 m IR transmitter and receiver cables, 3-pin and 2-pin terminal blocks
- Compatible HDBaseT receiver and Cat.6 cable, sold separately
Specifications
Show the specifications, manufacturer and safety Hide the specifications, manufacturer and safety
Specifications
| General | |
|---|---|
| Type | AV transmitter |
| Processor | |
| Chipset | VS010 |
| Display | |
| Maximum refresh rate | 60 Hz |
| High Dynamic Range (HDR) supported | Yes |
| Audio | |
| Audio transmission | Pass-through (via HDMI) |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Video in | 1 |
| HDMI version | 2.0 |
| HDMI in | 1 |
| HDBaseT port | Yes |
| Maximum resolution | 3840 x 2160 pixels |
| Bandwidth | 18 Gbit/s |
| HDCP | Yes |
| HDCP version | 2.2 |
| Extended display identification data (EDID) | Yes |
| RS-232 input ports | 1 |
| RS-232 output ports | 1 |
| Remote control (IR) input | 1 |
| Remote control (IR) output | 1 |
| Infrared (IR) frequency range | 20 - 60 kHz |
| Cable types supported | Cat6 |
| Maximum transfer distance | 70 m |
| Maximum distance in 4K at 60 Hz | 40 m |
| RJ-45 output ports | 1 |
| Bidirectional | Yes |
| Compatibility | |
| Compatible receiver | Lindy 38342 |
| Power | |
| Power source type | DC |
| Power over Cable (PoC) | Yes |
| Operating voltage (transmitter) | 24 V |
| Output current | 1 A |
| Design | |
| Product colour | White White |
| Housing material | Metal |
| Wall plate format | EU standard 1-gang wall plate (8 x 8 cm) |
| Weight & dimensions | |
| Width | 80 mm |
| Depth | 38.05 mm |
| Height | 80 mm |
| Weight | 390 g |
| Operating conditions | |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 to 60 °C |
| Operating relative humidity (H-H) | 20 - 90% |
| Sustainability | |
| Sustainability compliance | Yes |
| Certifications | |
| Compliance certificates | CE, Federal Communications Commission (FCC), RoHS, UKCA |
| Packaging content | |
| AC adapter included | Yes |
| Transceiver(s) included | Yes |
| Manual | Yes |
| Warranty & support | |
| Warranty | 3 years |
Manufacturer and safety
Made by Lindy-Elektronik GmbH, LINDY-Elektronik GmbH | Markircher Str. 20 – 24 | D-68229 Mannheim. Reach it at info@lindy.com.
In the same category
€238.60 incl. VAT










