Skip to content
Rezo

Lindy

Lindy 4K30 HDMI & USB over IP 38396 AV and KVM over IP encoder, HDMI 2.0, USB 2.0, PoE, 9 x 9 video wall

€745.40 incl. VAT

including an eco-contribution of €0.13

Available, free delivery, estimated Tuesday 8 or Wednesday 9 December

Warranty: 3 years

Video over your network? Contact us for advice or a quote

4K HDMI and USB KVM over IP encoder for video walls

Connected to this encoder, a PC or media player becomes a source sent across the network to one or several displays. It works with the Lindy 38397 decoder at the display end and the 38395 controller, which directs sources to displays. USB KVM control also gives access to the PC from the console attached to the remote decoder. The installation grows module by module, from a single display to a full matrix.

Key features

  • 4K video at 30 Hz over IP, HDMI 2.0 input up to 3840 x 2160 at 60 Hz, HDCP 2.2, CEC
  • Up to 100 m over Cat6, Cat6a or Cat7 cable
  • Video walls up to 9 x 9 and multicast distribution, managed by the controller
  • JPEG2000 main stream, H.264/H.265 secondary stream, API commands for third-party control apps
  • USB 2.0 Type-B port, HDMI output, RS-232, IR in and out
  • Analogue audio in and out on 3-pin terminal block
  • Built-in web interface with drag and drop and image preview
  • 802.3at PoE power or AC adapter, included
  • Metal housing, 204 x 100 x 21.5 mm, included with mounting brackets and IR cables
  • Network through a layer 3 managed 1 Gbit/s switch, IGMP snooping and 8K Jumbo frames
  • Decoder and controller from the same range, sold separately

Specifications

Show the specifications, manufacturer and safety

Specifications

General
TypeAV transmitter
Display
Maximum refresh rate30 Hz
Video wallUp to 9 x 9
Camera
Video compressionJPEG2000 (main stream), H.264/H.265 (secondary stream)
Network
Ethernet LANYes
Power over Ethernet (PoE) supportYes
Supported network protocolsIP
Ports & interfaces
Connectivity technologyWired
USB ports quantity1
USB version2.0
USB connector typeUSB Type-B
HDMI version2.0
HDMI in1
Number of HDMI outputs1
Consumer Electronics Control (CEC) supportYes
Maximum resolution3840 x 2160 pixels
Maximum input resolution3840 x 2160 pixels at 60 Hz
Bandwidth18 Gbit/s
HDCPYes
HDCP version2.2
Analogue audio input/output3-pin terminal block (input and output)
3.5 mm (1/8-inch) inNo
3.5 mm (1/8-inch) outNo
Serial ports quantity1
Serial interface typeRS-232
Remote control (IR) input1
Remote control (IR) output1
Infrared (IR) frequency range20 - 60 kHz
Cable types supportedCat6, Cat6a, Cat7
Maximum transfer distance100 m
RJ-45 input ports1
DC-in jackYes
Power
Power source typeDC
Operating voltage12 V
Output current1 A
PoE standard802.3at
Power consumption8 W
Design
Product colour Black Black
Housing materialMetal
Weight & dimensions
Width204 mm
Depth100 mm
Height21.5 mm
Weight780 g
Operating conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 to 60 °C
Operating relative humidity (H-H)20 - 90%
Storage relative humidity (H-H)20 - 90%
Sustainability
Sustainability complianceYes
Certifications
Compliance certificatesCE, Federal Communications Commission (FCC), REACH, RoHS, UKCA
Packaging content
AC adapter includedYes
Included power plug typesAU, EU, UK, US
Cables includedIR
Mounting kitYes
ManualYes
Warranty & support
Warranty3 years

Manufacturer and safety

Made by Lindy-Elektronik GmbH, LINDY-Elektronik GmbH | Markircher Str. 20 – 24 | D-68229 Mannheim. Reach it at info@lindy.com.

Manufacturer's safety and regulatory information

In the same category

€745.40 incl. VAT