Network horn speaker, 120 dB, IP66, wall or pole mount, black

Lindy 4K30 HDMI & USB over IP 38397 AV over IP decoder, HDMI 2.0, USB KVM, PoE, video wall up to 9 x 9
Image 1 of 5
€582.80 incl. VAT
including an eco-contribution of €0.13
Available, free delivery, estimated Tuesday 8 or Wednesday 9 December
Warranty: 3 years
Video over your network? Contact us for advice or a quote
4K HDMI over IP decoder with USB KVM and video wall support
This module sits at the display end of the Lindy 4K30 HDMI & USB over IP system and shows the image sent by an encoder across the network. It works with the 38396 encoder, while the 38395 controller manages the installation and directs multiple sources to multiple displays. From the remote end, a KVM console controls the PC connected to the encoder.
Key features
- 3840 x 2160 video at 30 Hz on HDMI 2.0 output, HDCP 2.2 and CEC
- Video wall up to 9 x 9
- Network link up to 100 m over Cat6, Cat6a or Cat7 cable
- JPEG2000 main stream and H.264/H.265 secondary stream
- 4 USB Type-A 1.1/2.0 ports
- RS-232 port, 20 to 60 kHz infrared input and output
- Audio on 3-pin terminal blocks, point-to-point only mic input, LPCM only output
- Powered by 802.3at PoE or AC adapter
- Built-in web interface with drag and drop and image preview, API commands for third-party apps
- Metal housing, 204 x 100 x 21.5 mm
- Supplied with multi-country AC adapter, IR emitter and receiver cables, 2 mounting brackets and 3 terminal blocks
- Encoder, controller and layer 3 1 Gbit/s managed switch (IGMP snooping, 8K Jumbo), sold separately
Specifications
Show the specifications, manufacturer and safety Hide the specifications, manufacturer and safety
Specifications
| General | |
|---|---|
| Type | AV receiver |
| Display | |
| Maximum refresh rate | 30 Hz |
| Video wall | Up to 9 x 9 |
| Camera | |
| Video compression | JPEG2000 (main stream), H.264/H.265 (secondary stream) |
| Network | |
| Ethernet LAN | Yes |
| Power over Ethernet (PoE) support | Yes |
| Ports & interfaces | |
| Connectivity technology | Wired |
| USB ports quantity | 4 |
| USB version | 1.1/2.0 |
| USB connector type | USB Type-A |
| HDMI version | 2.0 |
| Number of HDMI outputs | 1 |
| Consumer Electronics Control (CEC) support | Yes |
| Maximum resolution | 3840 x 2160 pixels |
| Bandwidth | 18 Gbit/s |
| HDCP | Yes |
| HDCP version | 2.2 |
| Analogue audio input/output | 3-pin terminal block (input and output) |
| 3.5 mm (1/8-inch) in | No |
| 3.5 mm (1/8-inch) out | No |
| Serial ports quantity | 1 |
| Serial interface type | RS-232 |
| Remote control (IR) input | 1 |
| Remote control (IR) output | 1 |
| Infrared (IR) frequency range | 20 - 60 kHz |
| Cable types supported | Cat6, Cat6a, Cat7 |
| Maximum transfer distance | 100 m |
| RJ-45 input ports | 1 |
| DC-in jack | Yes |
| Power | |
| Power source type | DC |
| Operating voltage | 12 V |
| Output current | 1 A |
| PoE standard | 802.3at |
| Power consumption | 4 W |
| Design | |
| Product colour | Black Black |
| Housing material | Metal |
| Weight & dimensions | |
| Width | 204 mm |
| Depth | 100 mm |
| Height | 21.5 mm |
| Weight | 760 g |
| Operating conditions | |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 to 60 °C |
| Operating relative humidity (H-H) | 20 - 90% |
| Storage relative humidity (H-H) | 20 - 90% |
| Sustainability | |
| Sustainability compliance | Yes |
| Certifications | |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Packaging content | |
| AC adapter included | Yes |
| Included power plug types | AU, EU, UK, US |
| Cables included | IR |
| Mounting kit | Yes |
| Manual | Yes |
| Warranty & support | |
| Warranty | 3 years |
Manufacturer and safety
Made by Lindy-Elektronik GmbH, LINDY-Elektronik GmbH | Markircher Str. 20 – 24 | D-68229 Mannheim. Reach it at info@lindy.com.
In the same category
€582.80 incl. VAT









