Skip to content
Rezo

Ubiquiti

Ubiquiti UniFi Access Elevator Starter Kit Elevator access control kit, 18 floors, G2 NFC reader, 10 cards

€1,008.80 incl. VAT

Restock announced around Monday 14 December

Out of stock for now, this product can be ordered on quote, which will give you its lead time.

Which access control suits your site? Contact us for advice or a quote

UniFi elevator access control for up to 18 floors

This Ubiquiti kit controls access to an elevator and handles up to 18 floors and 6000 users. Each user identifies with a card, an NFC badge or mobile unlock, and a simple hand wave requests exit. Its two-wire PoE extenders rely on a HomePlug AV link.

Key features

  • Elevator Hub with 18 output relays, 30 V DC, 2 A contacts
  • IP55 G2 reader, NFC and Bluetooth Low Energy 4.1, NFC read range under 30 mm
  • Inputs for emergency, car position and status, door status
  • 4 Gigabit Ethernet PoE+ ports, 30 W max per port, 45 W PoE budget
  • 1 Gigabit Ethernet management port
  • 2 extenders with 10/100 Mbit/s port and PoE+ output
  • Managed with UniFi Access
  • Supplied with 10 MIFARE DESFire access cards and the reader flush mount box
  • PoE++ switch or injector for the hub, sold separately

Specifications

Show the specifications, manufacturer and safety

Specifications

General
Product lineUniFi
Audio
Speaker power0.7 W
Network
ConnectivityBluetooth Low Energy 4.1, NFC
NFC frequency13.56 MHz
NFC technologiesISO/IEC 14443A, 14443B, 15693, 18092 (Ecma 340), MIFARE Classic, MIFARE DESFire, Sony FeliCa (ID only), NFC Forum T1T to T5T
NFC read range< 30 mm
Power over Ethernet plus (PoE+) ports quantity4
Total Power over Ethernet (PoE) budget45 W
Power over Ethernet (PoE) power per port30 W
Extender PoE output1x PoE+ (48 V DC, 0.72 A)
Ports & interfaces
Network interface4 RJ45 Gigabit Ethernet ports, 1 RJ45 Gigabit Ethernet management port
Emergency input1
Digital inputsEmergency, car position (5 bits), car status (up/down/stop/full), door status (open/closed)
Number of output relays18
Contact breaking capacity30 V DC, 2 A
2-wire PoE extender interface1 10/100 Mbit/s port, 1 HomePlug AV link
Sensors & positioning
SensorsProximity sensor
Security
Face recognitionNo
NFC card and badge accessYes
Access card formatISO 7810 ID-1 (MIFARE DESFire, 13.56 MHz)
PIN code accessNo
Mobile unlockYes
Hand gesture request to exitYes
Number of supported floors18
Maximum number of users6000
Management
Management softwareUniFi Access
Power
Power methodPoE++
PoE input1x PoE++ (50 V DC, 1.2 A)
Power consumption (max)7 W (excluding PoE output)
Design
Housing materialPolycarbonate
Mount materialPolycarbonate
LED indicatorsWhite/Blue
Reset buttonYes
Ergonomics & mounting
MountingsReader, flush mount box (included), junction box (optional)
Weight & dimensions
Dimensions129.3 x 244.7 x 33.6 mm
Weight537 g
G2 Reader dimensions93 x 40 x 36.5 mm
G2 Reader weight82 g
Operating conditions
Operating temperature (T-T)-10 to 40 °C
Operating relative humidity (H-H)5 - 95%
Durability & reliability
International Protection (IP) codeIP55 (G2 reader)
ESD/EMP protectionAir ± 8 kV, contact ± 4 kV
Certifications
CertificationCE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1
NDAA complianceYes

Manufacturer and safety

Made by Ubiquiti Inc., 685 Third Avenue, 27th Floor, New York, NY 10017, USA. Reach it at compliance@ui.com.

Its responsible person in the European Union is Ubiquiti International Holding B.V., Ekkersrijt 3102, 5692 CC Son en Breugel, Netherlands. Reach it at legal@ui.com.

Manufacturer's safety and regulatory information

In the same category