Managed Layer 3 1U rackmount switch, 24 x 10GbE ports and 2 x 25 Gbit/s SFP28 ports

Ubiquiti UniFi Switch Pro XG 24 Layer 3 managed switch, 16 x 10 Gbit/s, 8 x 2.5 Gbit/s, 2 SFP28, 1U rackmount
Image 1 of 7
€1,390.40 incl. VAT
3 variants
- Internal, 200 W (€1,390.40 incl. VAT, In stock)
- Internal, 870 W · USW-Pro-XG-24-PoE (€2,239.10 incl. VAT, In stock)
- Internal, 870 W · USW-Pro-XG-24-PoE-EU (€2,148.50 incl. VAT, In stock)
In stock, free delivery, estimated Tuesday 24 or Wednesday 25 November
Which switch suits your network? Contact us for advice or a quote
Layer 3 10G switch with 24 copper ports and 2 SFP28
This UniFi switch combines switching and inter-VLAN routing in a single device, with a built-in DHCP server. Etherlighting and a 1.3" touchscreen round out its equipment. Alongside its internal 200 W power supply, it accepts backup power through its UniFi RPS input. Its mounting suits racks 600 to 1066 mm deep.
Key features
- 16 copper 10 Gbit/s ports and 8 copper 2.5 Gbit/s ports
- 2 SFP28 ports
- 460 Gbit/s switching capacity, 230 Gbit/s throughput, 342 Mpps, 8 MB packet buffer
- 512 IPv4 static routes, DHCP relay and DHCP snooping
- 1000 VLANs, voice VLAN, port isolation
- ACLs 256 IPv4 and 256 MAC, IEEE 802.1x authentication
- LACP link aggregation, port mirroring, loop protection
- 1U rackmount chassis in SGCC steel, 442 x 480 x 44 mm
- Managed with UniFi Network 9.0.114 or later
Specifications
Show the specifications, manufacturer and safety Hide the specifications, manufacturer and safety
Specifications
| General | |
|---|---|
| Product line | UniFi |
| Memory | |
| Packet buffer memory | 8 MB |
| Display | |
| Display type | LCM |
| Display | 1.3" touchscreen |
| Network | |
| Switch layer | L2/L3 |
| Flow control support | Yes |
| Switching capacity | 460 Gbit/s |
| Speed | 230 Gbit/s |
| Forwarding rate | 342 Mpps |
| Jumbo frames support | Yes |
| Number of VLANs | 1000 |
| Voice VLAN | Yes |
| Inter-VLAN routing | Yes |
| Port isolation | Yes |
| Link aggregation | Yes |
| Spanning tree protocol | Yes |
| Loop protection | Yes |
| Rate limiting | Yes |
| Broadcast storm control | Yes |
| Port mirroring | Yes |
| IGMP snooping | Yes |
| LLDP-MED | Yes |
| Static route | Yes |
| IPv4 static routes | 512 |
| DHCP features | DHCP guarding, DHCP relay, DHCP server, DHCP snooping |
| MAC address table size | 32000 entries |
| Ports & interfaces | |
| 2.5G Ethernet ports quantity (copper) | 8 |
| 10G Ethernet ports quantity (copper) | 16 |
| SFP28 ports quantity | 2 |
| Security | |
| Authentication type | IEEE 802.1x |
| Access control list (ACL) | 256 IPv4, 256 MAC |
| Compatibility | |
| Minimum system requirements | UniFi Network 9.0.114 or later |
| Power | |
| Power supply | Internal, 200 W |
| Redundant power supply (RPS) support | Yes |
| Backup power supply | USP RPS DC input (UniFi RPS) |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 150 W |
| Design | |
| Form factor | 1U |
| Housing material | Steel (SGCC) |
| Mount material | SGCC steel |
| Etherlighting | Yes |
| Rack mounting | Yes |
| Fanless | No |
| Ergonomics & mounting | |
| Supported rack depth | 600 to 1066 mm |
| Weight & dimensions | |
| Width | 442 mm |
| Depth | 480 mm |
| Height | 44 mm |
| Weight | 7.2 kg |
| Operating conditions | |
| Operating temperature (T-T) | -5 to 40 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Durability & reliability | |
| Electrostatic Discharge (ESD) protection (air) | 30 kV |
| Electrostatic Discharge (ESD) protection (contact) | 20 kV |
| Certifications | |
| Certification | CE, FCC, IC, Anatel |
| NDAA compliance | Yes |
Manufacturer and safety
Made by Ubiquiti Inc., 685 Third Avenue, 27th Floor, New York, NY 10017, USA. Reach it at compliance@ui.com.
Its responsible person in the European Union is Ubiquiti International Holding B.V., Ekkersrijt 3102, 5692 CC Son en Breugel, Netherlands. Reach it at legal@ui.com.
Compare the variants
| Specification | ![]() | ![]() | ![]() |
|---|---|---|---|
€1,390.40 incl. VAT In stock | €2,239.10 incl. VAT In stock | €2,148.50 incl. VAT In stock | |
| Power supply | Internal, 200 W | Internal, 870 W | Internal, 870 W |
| Minimum system requirements | UniFi Network 9.0.114 or later | UniFi Network 9.1.120 or later | UniFi Network 9.1.120 or later |
| Backup power supply | USP RPS DC input (UniFi RPS) | USP RPS DC input | USP RPS DC input |
| AC input frequency | 50 - 60 Hz | 50/60 Hz | 50/60 Hz |
| Power consumption (max) | 150 W | 150 W (excluding PoE output); 870 W (with PoE output) | 150 W (excluding PoE output) ; 870 W (including PoE output) |
| Weight | 7.2 kg | 7.9 kg (without brackets); 8 kg (with brackets) | 7.9 kg (without brackets); 8 kg (with brackets) |
In the same category
€1,390.40 incl. VAT




















