Skip to content
Rezo

Cisco

Cisco Nexus N9K-C92348GC-FX3 Managed 1U rack switch, 48 Gigabit ports, 4 SFP28 25G ports, 2 QSFP28 100G ports

€6,545.90 incl. VAT

Restock announced around Wednesday 25 November

Out of stock for now, this product can be ordered on quote, which will give you its lead time.

Which switch suits your network? Contact us for advice or a quote

Cisco Nexus 48-port Gigabit switch with 100 Gbit/s uplinks

This Nexus switch runs Cisco NX-OS on a 4-core processor with 32 GB of RAM and a 128 GB SSD. Its 3 fan modules run in port-side intake or exhaust, to match the hot and cold aisles of the rack. With 2 power supplies in N+1 redundancy, it keeps running if one of them fails.

Key features

  • Switching capacity of 696 Gbit/s, 517 Mpps
  • 48 RJ-45 ports at 100 Mbit/s or 1 Gbit/s
  • 4 SFP28 ports at 1, 10 or 25 Gbit/s
  • 2 QSFP28 uplink ports at 40 or 100 Gbit/s
  • 40 MB packet buffer
  • Layer 2 features included, up to 4096 VLANs
  • IP unicast and multicast routing, including BGP and OSPF, with an additional NX-OS licence
  • Management through dedicated RJ-45 and SFP ports, RJ-45 serial console, USB Type A port
  • Up to 2 redundant N+1 power supplies, 350 W AC or HVAC/HVDC, 440 W or 715 W DC
  • 1U rack format, 439 x 499 x 44 mm, 6.57 kg

Specifications

Show the specifications, manufacturer and safety

Specifications

General
Product lineNexus
Processor
Processor cores4
Memory
RAM capacity32 GB
Packet buffer memory40 MB
Audio
Built-in devices128 GB SSD
Network
Switching capacity696 Gbit/s
Forwarding rate517 Mpps
Number of VLANs4096
Routing protocolBGP, ECMP, OSPF, EIGRP, RIP-2, PIM-SM, PIM-SSM, MSDP, MPLS, RSVP, IGMP, HSRP
MAC address table size512000 entries
Ports & interfaces
Interfaces48 x 10/100/1000 Base-T RJ-45 downlink 4 x 1/10/25Gbit LAN SFP28 2 x 100Gbit/40Gbit LAN QSFP28 uplink 1x USB Type A 1x management RJ-45 1x management SFP 1x serial (RS-232) RJ-45
Basic switching RJ-45 Ethernet ports quantity48
SFP28 ports quantity4
QSFP28 ports quantity2
Compatibility
Compatible operating systemsCisco NX-OS
Power
Redundant power supply (RPS) supportYes
Maximum number of power supplies2
Compatible power supplies350 W AC, 350 W HVAC/HVDC, 440 W DC, 715 W DC
AC input voltage100 - 240 V
Power consumption (typical)226 W
Power consumption (max)242 W
Design
Enclosure type1U rack-mountable
LED indicatorsStatus, beacon, environment, link/activity
Fans3 fan modules
Airflow directionPort-side intake or exhaust
Weight & dimensions
Width439 mm
Depth499 mm
Height44 mm
Weight6.57 kg
Operating conditions
Minimum operating temperature0 °C
Maximum operating temperature40 °C
Storage temperature (T-T)-40 to 70 °C
Operating altitude0 - 4000 m
Heat dissipation825.74 BTU/h
Certifications
Compliance certificatesCISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, GB 4943, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22 Class A, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, CAN/CSA C22.2 No. 60950-1 Second Edition, EN 300 386, KN 61000-4, AS/NZS CISPR22 Class A, WEEE

Manufacturer and safety

Made by Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134, USA. Reach it at complianceinfo@cisco.com.

Its responsible person in the European Union is Cisco Systems International B.V., Haarlerbergweg 13-19, 1101 CH Amsterdam, Netherlands. Reach it through its contact form.

In the same category