Managed Layer 3 1U rack switch, 32-port 10G, 16-port 2.5G, 4 SFP28 25G
Image 1 of 7
€3,816.70 incl. VAT
In stock, free delivery, estimated Tuesday 24 or Wednesday 25 November
Which switch suits your network? Contact us for advice or a quote
48-port PoE+++ multi-gigabit Layer 3 switch with SFP28 uplinks
This UniFi switch routes traffic between VLANs and hands out IP addresses itself through its built-in DHCP server. Switching capacity reaches 920 Gbit/s, with a forwarding rate of 684 Mpps. For professional audio and video, its Pro AV profiles cover Dante, NDI and AES67, among others.
Key features
- 48 RJ-45 PoE+++ ports up to 802.3bt Type 4, Class 8, 90 W per port
- 16 ports at 2.5 Gbit/s and 32 multi-gigabit ports at 10 Gbit/s
- 4 SFP28 ports at 25, 10 or 1 Gbit/s
- 2150 W PoE budget in shared mode at 200-240 V, 950 W in redundant mode
- Layer 3 with static routes, 512 IPv4 routes, 32000-entry MAC table
- 2 hot-swappable 1200 W power supplies, 4 redundant fans
- 1.3" front touchscreen
- IEEE 802.1x authentication, port isolation, 256 IPv4 and 256 MAC ACLs
- 19" 1U rackmount form factor, for 4-post racks 650 to 1000 mm deep
- Managed with UniFi Network 9.0.114 or later
Specifications
Show the specifications, manufacturer and safety Hide the specifications, manufacturer and safety
Specifications
| General | |
|---|---|
| Product line | UniFi |
| Memory | |
| Packet buffer memory | 8 MB |
| Display | |
| Display type | LCM |
| Display | 1.3" touchscreen |
| Network | |
| Switch type | Managed |
| Switch layer | L2/L3 |
| Ethernet speed | 10 Gbit/s (including 2.5 and 5 Gbit/s) |
| 10G support | Yes |
| SFP28 data rates | 25 / 10 / 1 Gbit/s |
| Networking standards | IEEE 802.1x, IEEE 802.3bt |
| Flow control support | Yes |
| Power over Ethernet (PoE) support | Yes |
| Power over Ethernet (PoE) type supported | Up to PoE+++ (802.3bt Type 4, Class 8) |
| Number of PoE+++ ports | 48 |
| Total Power over Ethernet (PoE) budget | 2150 W (200 - 240 V, shared mode); 1750 W (100 - 120 V, shared mode); 950 W (200 - 240 V, redundant mode); 750 W (100 - 120 V, redundant mode) |
| Power over Ethernet (PoE) power per port | 90 W |
| Switching capacity | 920 Gbit/s |
| Speed | 460 Gbit/s |
| Forwarding rate | 684 Mpps |
| MAC address table | 32000 entries |
| Jumbo frames support | Yes |
| VLAN support | Yes |
| Number of VLANs | 1000 |
| Virtual LAN features | Voice VLAN |
| Inter-VLAN routing | Yes |
| Port isolation | Yes |
| Link aggregation | Yes |
| Spanning tree protocol | Yes |
| Loop protection | Yes |
| Quality of Service (QoS) support | Yes |
| Rate limiting | Yes |
| Broadcast storm control | Yes |
| Port mirroring | Yes |
| Multicast support | Yes |
| IGMP snooping | Yes |
| LLDP-MED | Yes |
| Pro AV profiles | Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron |
| Static route | Yes |
| IPv4 routes | 512 |
| DHCP features | DHCP guarding, DHCP relay, DHCP server, DHCP snooping |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (10/100/1000/2500) and 10G Ethernet (10/100/1000/2500/5000/10000) |
| 2.5G Ethernet ports quantity (copper) | 16 |
| 10G Ethernet ports quantity (copper) | 32 |
| SFP module slots quantity | 4 |
| SFP28 ports quantity | 4 |
| Security | |
| Authentication type | IEEE 802.1x |
| Access control list (ACL) | 256 IPv4, 256 MAC |
| Compatibility | |
| Minimum system requirements | UniFi Network 9.0.114 or later |
| Power | |
| Power source | AC power |
| Power supply | 2 hot-swappable 1200 W AC/DC modules |
| Number of power supply units | 2 |
| Redundant power supply (RPS) support | Yes |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power connector | AC input socket |
| Power consumption (max) | 2400 W |
| Design | |
| Product colour | Grey Grey |
| Form factor | 1U |
| Housing material | SGCC |
| Mount material | SGCC steel |
| LED indicators | Activity, Link, Status |
| Reset button | Yes |
| Rack mounting | Yes |
| Hot-swappable | Yes |
| Number of fans | 4 |
| Redundant fans support | Yes |
| Ergonomics & mounting | |
| Supported rack depth | 19" 4-post rack, 650 to 1000 mm |
| Weight & dimensions | |
| Width | 442 mm |
| Depth | 496 mm |
| Height | 43.7 mm |
| Weight | 9.46 kg |
| Weight with mounting brackets | 9.56 kg |
| Operating conditions | |
| Operating temperature (T-T) | -5 to 40 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Heat dissipation | 785 BTU/h |
| Durability & reliability | |
| Electrostatic Discharge (ESD) protection (air) | 30 kV |
| Electrostatic Discharge (ESD) protection (contact) | 19 kV |
| Certifications | |
| Compliance certificates | Anatel, CE, Federal Communications Commission (FCC), Industry Canada (IC) |
| NDAA compliance | Yes |
| Packaging content | |
| Power supply included | Yes |
| Cables included | AC |
| Rack mount kit | Yes |
| Mounting brackets included | Yes |
Manufacturer and safety
Made by Ubiquiti Inc., 685 Third Avenue, 27th Floor, New York, NY 10017, USA. Reach it at compliance@ui.com.
Its responsible person in the European Union is Ubiquiti International Holding B.V., Ekkersrijt 3102, 5692 CC Son en Breugel, Netherlands. Reach it at legal@ui.com.
In the same category
€3,816.70 incl. VAT


















